Reach Out Today
Please provide your email address so that we can stay in touch and answer any questions you have! We will be reaching back out shortly.
Hear from Our Customers
That orange ring in your toilet disappears. Your shower doors stay clear without scrubbing. Your hair feels softer, your skin stops itching, and soap actually lathers the way it should.
Your dishwasher and water heater stop working so hard. Scale buildup quits choking your pipes and killing your appliances years before they should die. Most quality water softener systems add five to ten years to the life of your water heater alone.
You use half the soap and detergent you’re using now. Your energy bills drop because your water heater isn’t fighting through layers of mineral buildup just to heat your water. And you stop wondering what’s actually coming out of your tap every time you fill a glass.
Central Florida sits on limestone. That’s why your water is hard—naturally occurring minerals leach into the aquifer and come straight out of your tap. In Southside Estates and throughout Central Florida, water hardness runs between 100 and 300 parts per million. In some parts of the state, it hits 1,900 PPM.
We’re members of the National Water Quality Association. We hold an A-rating with the Better Business Bureau with a five-star rating and zero complaints. And unlike the national companies that disappear after they install your system, we actually service what we sell.
If you’re military or a first responder, you get $500 off. Not because it’s a marketing gimmick, but because we support the Tunnels to Towers Foundation and believe in taking care of the people who take care of us.
First, we test your water. Not a guess—a real analysis that tells us exactly how hard your water is and what else might be in it. Iron, sulfur, and bacteria are common in Florida well water, and they all need different approaches.
Then we size your system based on your home’s actual water usage and your specific hardness levels. A system that’s too small won’t keep up. A system that’s too large wastes salt and water during regeneration. We calculate what you actually need.
Installation takes a few hours. We connect the system to your main water line so every faucet, shower, and appliance gets soft water. We set the regeneration schedule based on your household size and usage patterns. Before we leave, we walk you through how the system works, how to add salt, and what to expect. Then we’re available whenever you need service, maintenance, or just have a question.
Ready to get started?
You get a system sized specifically for your home—not an off-the-shelf guess. We use WQA-approved materials and NSF-certified equipment, which means it meets actual safety and performance standards.
Your installation meets Florida plumbing codes. You get a full explanation of how your system operates, when it regenerates, and how to maintain it. Most homeowners add salt every four to six weeks and that’s it.
We offer ongoing service and maintenance. If something goes wrong, we fix it. We also deliver salt if you don’t want to haul 40-pound bags yourself. And because we’ve been doing this across Florida for decades, we know the specific water problems in Southside Estates and how to solve them. Your water comes from the same aquifer as your neighbors. We’ve seen it before, and we know what works.
If you’re scrubbing white buildup off your showerhead or faucets, you have hard water. If your soap doesn’t lather well or your skin feels tight and itchy after a shower, that’s hard water. If you’ve replaced a water heater or dishwasher earlier than expected, hard water probably killed it.
You can also look inside your toilet tank. If there’s a chalky white or orange buildup on the parts, that’s mineral scale. In Southside Estates, most homes have water hardness between 100 and 300 parts per million. Anything over 60 PPM is considered moderately hard. Anything over 180 PPM is very hard.
We test your water for free. That gives you a real number and tells you exactly what you’re dealing with. Then you can decide if a water softening system makes sense for your home.
A water softener removes hardness minerals—calcium and magnesium—through a process called ion exchange. It swaps those minerals for sodium ions, which don’t cause scale buildup. That’s what stops the white crusty stuff on your fixtures and protects your appliances.
A water filter removes contaminants like chlorine, sediment, bacteria, or chemicals. It improves taste and safety, but it doesn’t remove hardness. If you have hard water and a filter, you’ll still get scale buildup and all the problems that come with it.
Some homes need both. If your water is hard and has iron, sulfur, or bacteria, we might recommend a softener plus a filtration system. It depends on what’s actually in your water, which is why we test it first instead of guessing.
Most quality water softening systems run reliably for ten to fifteen years with basic maintenance. That means adding salt regularly, cleaning the brine tank once a year, and occasionally replacing small parts like seals or injectors.
The resin inside the tank—the part that actually softens your water—can last twenty years or more if you maintain the system properly. The control valve is usually the first thing that needs replacing, and that typically happens around the ten-year mark.
Florida’s water can be tough on equipment because of high mineral content and sometimes iron or sulfur. That’s why buying a quality system and actually maintaining it matters. The cheap systems you see at big box stores might last five years if you’re lucky. A properly installed, professional-grade system with regular service will outlast it by a decade.
No. A properly functioning water softener adds a tiny amount of sodium to your water—so small you won’t taste it. For reference, a slice of bread has more sodium than an eight-ounce glass of softened water.
If your water tastes salty, something’s wrong with the system. Either the brine tank is overfilling, the drain line is clogged, or the control valve isn’t cycling correctly. That’s not normal, and it’s fixable.
Some people install a separate line to their kitchen sink or refrigerator that bypasses the softener if they’re concerned about sodium intake. You can also use potassium chloride instead of sodium chloride in your system, though it costs more and doesn’t work quite as well in very hard water. For most people in Southside Estates, standard salt-based softening works fine and doesn’t affect taste at all.
Most repairs run between $150 and $500 depending on what’s broken. A control valve replacement is the most expensive repair, usually around $300 to $500. Replacing seals, cleaning a clogged injector, or fixing a stuck valve costs less—typically $150 to $250.
The key is catching problems early. If your system isn’t regenerating on schedule, if you’re seeing hard water symptoms again, or if you hear unusual noises, call for service. Ignoring a small problem turns it into a bigger, more expensive one.
We service every major water treatment brand, not just the systems we install. And because we’re local and actually answer the phone, you’re not waiting three weeks for a national company to send someone out. Most repairs happen within a few days, and we carry common parts on the truck.
Please provide your email address so that we can stay in touch and answer any questions you have! We will be reaching back out shortly.
"*" indicates required fields
