Reach Out Today
Please provide your email address so that we can stay in touch and answer any questions you have! We will be reaching back out shortly.
Hear from Our Customers
Your shower doors stop collecting that white film you’ve been scrubbing every week. Dishes come out of the dishwasher without spots. Your soap actually lathers instead of leaving a sticky residue on your skin.
But the bigger shift happens where you can’t see it. Inside your water heater, dishwasher, and washing machine, mineral buildup stops forming. That means these appliances aren’t fighting scale just to do their job, which is why many Florida homeowners see their water heaters last years longer after installing a water softening system.
Your energy bills often drop too. When your water heater isn’t coated in sediment, it heats water faster and uses less energy doing it. The same goes for your dishwasher and washing machine—they run more efficiently when they’re not clogged with calcium and magnesium deposits.
Most people notice their cleaning time gets cut in half. No more scrubbing mineral stains off faucets or trying to remove soap scum from the tub. Your laundry feels softer, your hair doesn’t feel heavy after washing, and your skin stops feeling tight and itchy after every shower.
We’ve been installing water treatment systems across Florida for over 50 years. We hold an A+ Better Business Bureau rating with a five-star review score and zero complaints, which matters when you’re trusting someone to work on your home’s water supply.
We’re members of the National Water Quality Association, which means our installation standards meet industry benchmarks and our team stays current on water treatment technology. We don’t do plumbing or water heater work—we focus exclusively on water purification, softening, and filtration systems.
In Catalina and throughout Lake County, your water comes from the Floridan aquifer, which moves through limestone before reaching your home. That’s why the water here is naturally hard, with mineral content high enough to damage appliances and make daily tasks harder than they should be. We’ve been solving this exact problem for Florida homeowners since the 1970s.
We start with a water analysis at your home. This tells us your exact hardness level and helps us size the system correctly for your household’s water usage. One size doesn’t fit all, especially in Florida where hardness levels vary significantly even within the same county.
Once we’ve designed your system, we schedule the installation. Our team handles all the plumbing connections, electrical setup if needed, and salt system configuration. For most homes, we install twin tank systems that alternate between tanks—one always working while the other regenerates. That means you never experience hard water breakthrough, even during peak usage times like morning showers or running the dishwasher.
After installation, we calibrate the system based on your water test results and your family’s usage patterns. We test the output to confirm you’re getting properly softened water throughout your home. Then we walk you through basic maintenance—mostly just keeping salt in the brine tank and occasionally cleaning the resin bed.
You’ll notice the difference immediately. Soap lathers better, your skin feels different after showering, and within a few days you’ll see that white film stop forming on your fixtures.
Ready to get started?
Your installation includes the complete water softener system, professionally sized for your home’s water usage and Florida’s specific hardness levels. We’re installing equipment built to handle the high mineral content common in Lake County’s water supply.
You get professional installation with all plumbing connections, system calibration based on your water test results, and output testing to confirm proper softening throughout your home. We configure the regeneration cycle based on your household size and usage patterns, not just factory default settings.
The system includes a brine tank for salt storage and the control valve that manages regeneration timing. For homes that need continuous soft water—families with high usage or specific timing needs—we install twin tank systems that ensure you never run out of softened water, even when one tank is regenerating.
We also provide ongoing service support because your water quality matters long after installation day. If you need maintenance, repairs, or just have questions about your system’s performance, we’re available. We also offer a $500 discount for military members and first responders, and we’re proud supporters of the Tunnels to Towers Foundation.
For most Florida homes on city water, a quality mid-range system with professional installation typically runs between $1,500 and $2,500. That includes properly sized equipment, efficient operation, reasonable warranties, and professional installation with calibration.
The exact cost depends on your home’s water hardness level, your household size, and whether you need a single or twin tank system. Larger homes with higher water usage need bigger systems. Homes with extremely hard water may need additional capacity to handle the mineral load.
What you’re paying for isn’t just the equipment. You’re getting a system that’s sized correctly for Florida’s water conditions, installed by technicians who understand local water chemistry, and calibrated specifically for your household’s usage patterns. That’s different from buying a box at a home improvement store and hoping it works.
A water softener removes the calcium and magnesium minerals that cause hardness. It uses a process called ion exchange, where hard minerals are swapped out for sodium or potassium ions. This stops scale buildup, helps soap work properly, and protects your appliances from mineral damage.
A water filter removes contaminants like chlorine, sediment, bacteria, or specific chemicals depending on the filter type. It improves taste, smell, and safety, but it doesn’t address hardness. You can have perfectly filtered water that still leaves scale on your fixtures and damages your water heater.
Many Florida homes benefit from both. The softener handles the hardness problem that’s common across the state, while filters address taste, odor, or specific contaminants in your local water supply. We often recommend whole-house filtration combined with softening for complete water treatment, but it depends on your water test results and what problems you’re actually experiencing.
A properly maintained water softener typically lasts 15 to 20 years in Florida, though that depends on your water quality, system quality, and how well you maintain it. Florida’s high mineral content means your system works harder than it would in areas with moderately hard water, which is why quality equipment matters here.
The resin bed inside the tank—the part that actually removes hardness—can last 10 to 15 years before needing replacement. The control valve and other mechanical parts may need service or replacement during the system’s lifetime. Regular maintenance extends the life of all these components.
What kills systems early is neglect. Running out of salt, letting iron or sediment build up in the resin bed, or ignoring error codes all shorten your system’s lifespan. Most of our customers who stay on top of basic maintenance—keeping salt in the tank and scheduling occasional service—get the full 15 to 20 years out of their investment.
No. Properly functioning water softeners don’t make your water taste salty. The sodium added during the softening process is minimal—typically less than 12.5 milligrams per 8-ounce glass for water with moderate hardness. That’s less sodium than you’d find in a slice of bread.
What you’re tasting in softened water is actually the absence of minerals, not the presence of salt. Hard water has a distinct mineral taste that many people are used to. When those minerals are removed, the water tastes different—smoother, sometimes almost slippery-feeling. Some people prefer it, others need time to adjust.
If you’re on a sodium-restricted diet or just prefer not to add any sodium to your drinking water, you have options. Many homeowners install a reverse osmosis system at the kitchen sink for drinking and cooking water, or we can set up your system to bypass the cold water line to your kitchen sink. You can also use potassium chloride instead of sodium chloride in your softener, though it costs more.
Yes, because Lake County’s city water comes from the Floridan aquifer, which is naturally hard. The water treatment plant removes contaminants and adds chlorine for safety, but they don’t soften the water. That means even city water in Catalina has the calcium and magnesium content that causes scale buildup and appliance damage.
You can see the evidence on your fixtures—white crusty deposits around faucets, cloudy spots on glassware, soap scum in your shower. Inside your water heater and other appliances, the same minerals are building up where you can’t see them, making these systems work harder and fail sooner.
City water in this area typically ranges from 100 to 300 parts per million hardness, which is considered hard to very hard. That’s enough to significantly impact your plumbing system, appliances, and daily water use. A water softener addresses this problem at the point where water enters your home, protecting everything downstream.
Please provide your email address so that we can stay in touch and answer any questions you have! We will be reaching back out shortly.
"*" indicates required fields
