Reach Out Today
Please provide your email address so that we can stay in touch and answer any questions you have! We will be reaching back out shortly.
Water Filtration System in Old City South, FL
Clean Water That Actually Tastes Like Water
Your tap water should be safe to drink without a second thought—no weird taste, no sulfur smell, no rust stains on everything you own.
Hear from Our Customers
Whole House Water Filtration Solutions
What Changes When Your Water Actually Works
You stop buying bottled water by the case. Your coffee tastes better. Your shower doesn’t leave that film on your skin.
The rust stains disappear from your sinks and toilets. Your water heater stops building up sediment that kills efficiency. Your dishwasher actually cleans dishes instead of leaving spots everywhere.
Hard water eats away at your appliances—your washing machine, your water heater, even your faucets. A proper water filtration system protects that equipment and extends its life by years. That’s real money saved, not just cleaner water.
You’re not just filtering out bad taste. You’re removing contaminants that shouldn’t be there in the first place—iron, sulfur, bacteria, chlorine, and whatever else is coming through your pipes. The goal is water you’d actually want to drink straight from the tap.
Water Treatment Experts in Old City South
We've Been Doing This for 50 Years
We have an A+ Better Business Bureau rating and a 5-star review average with zero complaints. That doesn’t happen by accident.
We’re members of the National Water Quality Association, which means we follow industry standards that actually matter. Our team has over 50 years of combined experience installing water filtration systems across Central Florida, including right here in Old City South, FL.
Old City South, FL has its own water quality challenges—iron content, hard water, and occasional sulfur issues depending on where your well draws from. We’ve tested hundreds of water samples from this area. We know what you’re dealing with before we even show up.
Our Water Filtration Installation Process
Here's What Happens When You Call Us
First, we test your water. Not a generic test—an actual analysis of what’s in your specific water supply. Iron levels, hardness, pH, bacteria, sulfur, nitrates. We need to know what we’re dealing with before we recommend anything.
Then we design a system based on those results and how much water your household actually uses. A family of five needs different filtration capacity than a couple. We size everything correctly from the start.
Installation typically takes a few hours depending on the system. We’re installing either a whole-house filtration system at your main water line, or an under-sink reverse osmosis system for drinking water, or both. You’ll see the difference immediately—clearer water, better taste, no more staining.
After installation, we walk you through basic maintenance. Most systems need a filter change every 6-12 months depending on your water quality and usage. We can handle that for you, or you can do it yourself. Either way, we’re available when you need us.
Ready to get started?
Water Filtration Options for Your Home
What You're Actually Getting Installed
Reverse osmosis systems are the gold standard for drinking water. They remove up to 99% of contaminants including lead, fluoride, chlorine, and dissolved solids. We install these under your kitchen sink with a dedicated faucet for purified water.
Activated carbon filtration handles chlorine, bad taste, and odors. It’s often part of a whole-house system combined with other filtration stages depending on what your water test shows.
UV water purification kills bacteria and viruses without chemicals. If your water source is a well or you’ve had bacterial contamination issues, UV is non-negotiable. It’s a light chamber that destroys microorganisms as water flows through.
Whole-house systems treat every drop of water entering your home. That means filtered water from every faucet, shower, toilet, and appliance. For Old City South, FL homes dealing with iron or hard water, this is usually the right move.
We also install salt-free water conditioning systems if you want scale protection without the ongoing cost and maintenance of a traditional water softener. These systems don’t remove hardness minerals, but they prevent them from building up in your pipes and appliances.
How do I know if I need a water filtration system?
If your water smells like sulfur, leaves rust stains, tastes metallic, or feels slimy, you need filtration. Those are obvious signs.
Less obvious: your appliances are breaking down faster than they should. Your water heater is only lasting 6-8 years instead of 10-12. Your faucets have mineral buildup. Your skin feels dry after every shower. You’re constantly buying bottled water because you won’t drink what comes out of the tap.
The only way to know for sure is to test your water. We do that for free. We’re looking at hardness levels, iron content, pH balance, total dissolved solids, and bacterial contamination. Once we see the results, we’ll know exactly what you need—or if you need anything at all. Some people just want peace of mind. Others have serious contamination issues that need immediate attention.
What's the difference between a whole-house system and under-sink filtration?
An under-sink reverse osmosis system only filters the water at one faucet—usually your kitchen sink. It’s designed for drinking and cooking water. It removes nearly everything, but it’s slow and only produces a few gallons at a time.
A whole-house water filtration system treats all the water entering your home. Every shower, every toilet, every appliance gets filtered water. If you have hard water or iron, this is what you need because those problems affect your entire plumbing system, not just your drinking water.
Most people with well water in Old City South, FL benefit from both. A whole-house system handles hardness, iron, and sediment. Then a reverse osmosis system at the kitchen sink takes care of final-stage purification for drinking water. You get complete coverage that way. If you’re on city water and just want better-tasting drinking water, an under-sink RO system might be enough.
How often do water filtration systems need maintenance?
Depends on the system and your water quality. Most whole-house carbon filters need replacement every 6-12 months. Reverse osmosis systems have multiple filters—sediment and carbon filters get changed every 6-12 months, and the RO membrane lasts 2-3 years.
UV systems need a bulb replacement once a year. The bulb doesn’t burn out like a regular light bulb—it loses effectiveness over time and stops killing bacteria as efficiently.
If you have a traditional water softener, you’re adding salt regularly and cleaning the brine tank once a year. Salt-free systems have even less maintenance—usually just a media replacement every few years depending on water hardness and usage.
We can handle all of this for you on a service schedule, or we can show you how to do it yourself. Filter changes are straightforward. Most homeowners handle their own once they’ve done it the first time. We’re always available if something doesn’t seem right or if you’d rather have us take care of it.
Will a water filtration system remove the sulfur smell from my water?
Yes, but you need the right type of filtration. That rotten egg smell is hydrogen sulfide gas, and it’s common in Old City South, FL well water.
Activated carbon filters can handle low levels of sulfur. For moderate to high levels, you need an oxidizing filter or an air injection system that converts the hydrogen sulfide into solid sulfur particles, then filters them out. For severe contamination, we might recommend chlorination followed by carbon filtration.
The solution depends on how much sulfur is in your water. That’s why we test first. If your sulfur levels are under 1 ppm, carbon filtration usually works. Above that, you need a more aggressive treatment system.
Some people also have sulfur bacteria in their well, which is a separate issue. That requires shock chlorination of the well and possibly a continuous disinfection system. We’ll know which situation you’re dealing with once we test your water and ask a few questions about when the smell is strongest.
How much does a water filtration system cost to install?
Under-sink reverse osmosis systems typically run $1,500-$3,000 installed, depending on the model and any additional features like remineralization or permeate pumps.
Whole-house systems vary widely based on what you need. A basic sediment and carbon filtration system might be $2,000-$4,000. Add iron removal, UV purification, or water softening, and you’re looking at $4,000-$8,000 or more for a complete system.
Custom systems for severe water quality issues can run higher. If you need multiple treatment stages—iron removal, sulfur treatment, UV disinfection, and softening—the equipment and installation costs add up. But you’re also solving multiple problems that are actively damaging your home and affecting your health.
We offer free water testing and consultations. Once we know what’s in your water and what you want to accomplish, we’ll give you an exact price. We also offer financing and a $500 discount for military and first responders. The investment pays for itself over time through appliance protection, reduced bottled water costs, and fewer plumbing repairs.
Local Resources