Reach Out Today
Please provide your email address so that we can stay in touch and answer any questions you have! We will be reaching back out shortly.
Phone:123-123-1234
Salt Free Treatment in Edgewood, FL
Stop Scale Without the Salt or the Hassle
Whole-home protection from hard water damage using zero salt, zero electricity, and zero wastewater—just cleaner pipes and longer-lasting appliances.
Hear from Our Customers
Salt-Free Water Conditioner Benefits
What Actually Changes in Your Home
Your water heater stops building up that crusty white layer on the heating element. Your showerhead doesn’t clog every few months. Your dishwasher quits leaving spots on glassware.
That’s what a salt-free water conditioner does—it doesn’t remove minerals, but it changes how they behave. Instead of sticking to your pipes and appliances, the minerals stay suspended in the water and wash right through. No scale buildup. No narrowing pipes. No early appliance replacements.
You’re not hauling salt bags from the car anymore. You’re not setting reminders to refill a tank or schedule a service call. The system runs on its own, uses no electricity, and doesn’t dump brine into the environment. It just works quietly in the background while your home stays protected.
And if you’re in Edgewood, you already know Florida water is loaded with limestone. Our average hardness sits around 216 ppm—that’s considered very hard. A saltless water system handles that load without adding sodium to your drinking water or creating waste you have to manage.
Water Treatment Experts in Edgewood
We've Been Doing This for 50 Years
We’ve been treating water across North and Central Florida since the early 1970s. We’re A+ rated with the Better Business Bureau, hold a 5-star rating with zero complaints, and we’re members of the National Water Quality Association.
We don’t do plumbing. We don’t install water heaters. We focus entirely on water treatment—softening, filtration, purification—and we do it at a level most companies can’t match. That focus matters when you’re comparing us to national brands that sell hard but service poorly.
Edgewood homeowners deal with the same hard water issues as the rest of Central Florida, and we’ve seen it all. We know what works, what doesn’t, and what actually lasts. Every system we install is based on your water test results and your household’s specific usage—not a one-size-fits-all box from a warehouse.
How Salt Free Treatment Works
The Process Is Simpler Than You Think
We start with a water test. That tells us your hardness level, what else is in your water, and how much flow your household needs. From there, we recommend a system sized correctly for your home—not oversold, not undersized.
The technology we use is called Template Assisted Crystallization, or TAC. It’s a media inside the tank that converts hardness minerals into microscopic crystals. Those crystals can’t stick to surfaces, so they flow through your plumbing without forming scale. Studies show TAC reduces scale formation by 88% to 97%, and some independent tests have measured effectiveness as high as 99.6%.
Installation is straightforward. The system doesn’t need electricity, a drain line, or a storage tank. It connects inline with your main water supply and starts working immediately. There’s no programming, no salt to add, no regeneration cycle to manage.
Maintenance is minimal. You’ll replace a pre-filter every 6 to 12 months depending on your water quality. The TAC media itself lasts about 5 years. The system as a whole can run 10 to 20 years with basic care. That’s it.
Ready to get started?
What's Included with Your System
You Get More Than Just a Tank
Every water descaler system we install comes with a pre-filter to catch sediment before it reaches the TAC media. That protects the system and keeps it running efficiently. You’ll also get a bypass valve so you can isolate the unit for service without shutting off water to the whole house.
We size the system based on your peak flow rate and daily usage. A typical household in Edgewood uses between 80 and 100 gallons per person per day. If you’ve got a family of four, that’s 300 to 400 gallons. We make sure your system can handle that volume without restricting pressure or performance.
Florida’s water is tough. Edgewood pulls from aquifers rich in limestone, which means high mineral content year-round. A water softener alternative like TAC handles that load without chemicals, without waste, and without ongoing costs. You’re not buying salt every month. You’re not paying for extra water usage during regeneration cycles. You’re not adding sodium to water you drink or cook with.
And if you’re concerned about the environment, this matters: traditional softeners discharge brine into the wastewater system. Some areas have banned them outright because of the chloride load. A hard water conditioner creates zero discharge and uses zero electricity. It’s a cleaner approach that still gets results.
Does a salt-free system actually soften the water like a traditional softener?
No, and that’s an important distinction. A salt-free system is technically a conditioner, not a softener. It doesn’t remove hardness minerals from the water—it changes their structure so they can’t form scale.
If you test the water after it passes through a TAC system, it will still show the same hardness level in parts per million. But those minerals won’t stick to your pipes, your faucets, or your appliances. They stay suspended and wash away.
That means you won’t get the slippery feel some people associate with softened water. You also won’t see soap lather quite as much. But you will stop dealing with scale buildup, clogged showerheads, and shortened appliance life. For most people, that’s the outcome that actually matters.
How much does it cost to run a salt-free treatment system?
Almost nothing. The system doesn’t use electricity, so there’s no added cost to your power bill. It doesn’t waste water during a regeneration cycle like a traditional softener does, so your water bill stays the same.
The only recurring cost is replacing the pre-filter, which runs between $20 and $50 depending on the model, and you’ll do that once or twice a year. Compare that to a salt-based softener where you’re spending $300 to $400 annually just on salt, plus the water and electricity to regenerate the resin.
Over five years, a saltless water system saves most homeowners over $2,000 in operating costs. And that’s before you factor in the longer lifespan of your water heater, dishwasher, and washing machine because they’re not fighting scale buildup.
Will this remove existing scale that's already built up in my pipes?
Yes, but it takes time. TAC systems don’t just prevent new scale—they can actually help break down existing deposits. As conditioned water flows through your plumbing, it gradually loosens the scale that’s already stuck to the walls of your pipes.
You won’t see results overnight. Depending on how much buildup you have, it can take several months to a year before you notice a real difference in water pressure or flow. But it does happen, and it happens without chemicals or aggressive flushing.
Some homeowners notice their showerheads and faucet aerators start working better within a few weeks. That’s usually the first sign. Appliances take longer, but over time, you’ll see less residue on heating elements and fewer clogs in spray arms and valves.
Is the water safe to drink after it goes through the system?
Absolutely. A salt-free water conditioner doesn’t add anything to your water—no sodium, no chemicals, nothing. The minerals that were already in your water stay in your water. They’re just restructured so they don’t cause problems.
That’s a big advantage if anyone in your household is on a low-sodium diet or has been advised to limit salt intake. Traditional softeners replace calcium and magnesium with sodium, which can add 20 to 50 milligrams of sodium per liter depending on your water hardness. A TAC system avoids that entirely.
The water tastes the same going in as it does coming out. If you want to improve taste or remove contaminants, you’d pair the conditioner with a separate filtration system—but the conditioner itself doesn’t change what’s safe to drink.
How long does a salt-free treatment system last before I need to replace it?
The TAC media inside the tank lasts about 5 years under normal use. After that, it loses effectiveness and needs to be replaced. That’s a straightforward swap—we drain the tank, remove the old media, and refill it with fresh material.
The tank itself, the valves, and the plumbing connections can last 10 to 20 years or more if maintained properly. There are no moving parts, no electronic controls, and no resin that degrades from salt exposure. It’s a simpler system with fewer failure points.
Compare that to a traditional softener where the resin bed can foul, the brine tank can crack, and the control valve can fail. Salt-free systems have a longer functional lifespan because there’s just less that can go wrong.
Local Resources
